For the brick machine equipment, the maintenance of the operator must be meticulous. Otherwise, if there is no maintenance, there may be unexpected problems later. The maintenance of the machine can extend the service life of the machine.
1. In the normal operation of the flower brick machine, the conveyor belt can be fed, and the feeding should be uniform. The iron and aluminum separator is installed to prevent the mixing of iron and other similar hard objects and damage the mechanical roller.
2, before stopping, please stop feeding before stopping the machine, and then separate the motor power after separation.
3. After overhauling or adjusting the discharge orifice, the rotor should be rotated by manpower first. It is confirmed that the rotor and other parts are free from friction and seizure and can be flexibly rotated.
4, when the product deformation is too large, should be timely replacement of the mold, wear serious mold, will affect the quality of products, affect the credibility of enterprises.
5, check the seal of the bearing block of the flower brick machine regularly. The grease in the bearing seat should be filled once a month, and every three months should be cleaned and replaced with oil felt.
6, in order to ensure the safety of operators and equipment, it is forbidden to adjust and clean in the production of brick machines, so as to avoid accidents.